Home · Steelcase Furniture Installation in Austin

Steelcase panels and benching,
built run by run.

Panel systems, benching, height-adjustable desks and task seating, installed across Austin offices and home offices. Scope reviewed first, then sequenced by zone to your access windows.

5.0190+ reviews & ratings
Same-dayAnd next-day availability
Open 7 days8am–8pm

Call or text(512) 333-8525

Same-day and next-day slots · Austin & Central Texas

Request a quote

Name

Phone

Type of job

How many items?

No obligation. We come back with questions, then a number.

Installed for

TransUnion
Travis ATX
Austin Lighthouse for the Blind
Strategic Thermal Labs
NETSOL
Subcritical Systems
Renewed Office Interiors
Elevate Healthcare
RYSE Management

How the systems arrive

Steelcase panel systems arrive as parts, not furniture. Answer is a run of frames joined at in-line, L, T and X junctions, dressed with skins in fabric, steel, glass, laminate or wood, then fitted with worksurfaces, overhead storage, pedestals and screens. Montage uses stackable frames with removable tiles, and Kick goes from low and glass panels up to tall panels with stackers.

Benching and desks are their own kits. FrameOne is a bench with a sliding top for cable access and an optional center rail for screens and monitor arms. A Migration SE desk has lifting columns, a control box under the top and an up and down or preset controller, while Airtouch raises and lowers with no electrical parts at all.

How a floor is installed

We are experienced with Steelcase, and a panel floor is planned before a frame comes out of its carton: the specifications, the floor plan, the delivery timing and the site access. Runs go up zone by zone, or by priority area, inside the windows the building gives us, phased around the people still at their desks, with the crew sized to the project and the deadline.

Nothing is joined until its parts are counted against the list, and each run goes up in the manufacturer's order, with the panel feet set to the slab so the junctions close square. A short or damaged part is written into the inspection report. Answer, Montage and FrameOne carry power and data, and that side is for your electrician, because we do nothing electrical.

Masterwork Assembly is commercially insured, and a COI and a W-9 go out on request. The full sequence is set out under cubicle and workstation installation.

Chairs and desks for the home office

A Leap can arrive with its base still to attach, and a Migration SE needs building, so both are finished in the room they will be used in. The desk's wires are clipped under the top with the clips and ties that come with it, then it is plugged into an existing outlet and run through its height range in front of you. Every job is covered by the Masterwork Promise.

What is included

Panels, benching and the desks around them.

Furniture Assembly by Masterwork Assembly.

Commercial

What we build

Panel systems and junctions
Skins, tiles and stackers
Benching and worksurfaces
Height-adjustable desks
Overheads, pedestals and screens
Task chairs
Parts count and inspection report
Packaging broken down

Request a quote

In their words

Five stars,
every time.

5.0 from 190+ reviews & ratings See every one

What you are covered for

Coverage that comes standard.

Tier one · Masterwork Coverage

Product inspection Every item checked as it is unboxed, with a written report of any pre-existing damage or missing parts.
Full cleanup The whole area cleaned, every box broken down and moved wherever you want it.
Licensed & insured General liability cover. COI and W-9 go out on request.
Precision placement Every piece set exactly where you want it, to the floor plan if there is one.
Satisfaction guarantee We do not leave until you are happy with the assembly.

See how a visit runs

Tier two · The Masterwork Promise

$1,000Broken item guaranteeIf our team breaks an item during assembly, we replace it or reimburse you for it.
$500Day-of guaranteeCash, if we do not show up on your scheduled day because we planned it badly.
30 daysWorkmanship warrantyAnything that goes wrong because of our assembly, fixed free of charge.

Ask what your job is covered for

Standard on every job we quote. Exceptions go in writing before you book.

Asked and answered

Asked about Steelcase.

Do you install Steelcase panel systems and cubicles?

Yes. On Answer, the frames are joined at the junctions the plan calls for, in-line, L, T or X, and dressed with their skins, with the worksurfaces, overheads, pedestals and screens fitted in the manufacturer's order. Montage and Kick follow their own sequence from the manufacturer. Each run is set out to the floor plan, aligned and leveled with the panel feet set to the slab, which is rarely flat, and nothing is joined until its parts have been counted against the list.

Can you install FrameOne benching?

Yes. FrameOne benches are built to the floor plan in the manufacturer's order, with the sliding tops set so the cables underneath stay reachable, and the center rail, where there is one, fitted with the screens on the plan. Each run is aligned and leveled from one end to the other, so the tops meet flush down the length of the bench. We route cables, not power: the power and data connections are electrical work, and they stay with your electrician.

Can you assemble a Steelcase Migration SE standing desk?

Yes. The brand lists Migration SE as requiring assembly, and we build it in the manufacturer's order in the room it will stay in, then level it to the floor. The wires are clipped under the worksurface with the clips and ties supplied, and the desk is plugged into an existing outlet and run through its height range in front of you. We do no electrical work, so if there is no outlet where the desk is going, plan that with your electrician first.

Who connects the power in Answer and Montage panels?

Your electrician, not us. Answer routes power and data through its frames, and Montage runs them in the base and along the frame. That part is electrical work, and we do nothing electrical. Our part is the structure: frames joined, skins or tiles on, worksurfaces and storage set to the plan. The power connections belong to your electrician, so it helps to know at scope review when they are coming, and a zone can be left open for them and finished after.

Can you reconfigure our existing Steelcase panels for a new layout?

Yes. Answer is built around frames that can be taken down and reused, and Montage frames stack and destack, so an existing run can be taken apart and built again to a new floor plan. Every part is counted against the list before anything is joined again, and anything short or damaged goes into the written inspection report. For a relocation, the runs are taken apart at the old space and built again at the new one, to the new floor plan, zone by zone.