Home · Fully Jarvis Standing Desk Assembly in Austin

The Jarvis desk from Fully,
built in the room it lives in.

Jarvis Laminate and Jarvis Bamboo standing desks, built in the manufacturer's order, leveled to the floor and run through their height range in front of you.

5.0190+ reviews & ratings
Same-dayAnd next-day availability
Open 7 days8am–8pm

Call or text(512) 333-8525

Same-day and next-day slots · Austin & Central Texas

Request a quote

Name

Phone

Type of job

How many items?

No obligation. We come back with questions, then a number.

How a Jarvis arrives

The Jarvis, from Fully, is sold as a standing desk that requires assembly, in laminate or bamboo, on a powder-coated steel frame with two-stage or three-stage lifting columns. The frame box holds the two columns, the frame ends and side brackets, two center rails that set the width, the feet, the control box and its cables, and a handset, either up and down or programmable.

The brand's instructions build it upside down on the desktop: each column into its frame end, the side brackets on, then the rails slid in, centered on their marks and locked. The control box slides onto its frame end and takes both leg cables and the handset, the feet go on, and the desk is turned over and calibrated before first use.

How we build a Jarvis

We are experienced with Fully and the Jarvis, and the desk is built in the room it will stay in, in the manufacturer's order, with every part counted against the list before anything is joined. The rail set screws and the foot screws are the ones the brand warns about, so they are checked tight before the desk is turned. Then the leveling glides are set to the floor, not the desk.

It is plugged into an existing outlet, reset the way the instructions describe so the columns are synced, and run through its height range in front of you. Cables are clipped to the frame or run into the tray if you ordered one. We do no electrical work, so a new outlet where the desk is going is for your electrician.

Casters, if you ordered them, replace the leveling glides before the desk is turned over, as the instructions set out. The rest of the room is covered under home office setup, and every job is covered by the Masterwork Promise.

What is included

The desk, the frame and the extras.

Furniture Assembly by Masterwork Assembly.

Residential

What we build

Jarvis Laminate and Bamboo desks
Two-stage and three-stage frames
Control box and handset
Cable clips and cable tray
Casters or leveling glides
Reset and height-range check
Packaging broken down

Request a quote

In their words

Five stars,
every time.

5.0 from 190+ reviews & ratings See every one

What you are covered for

Coverage that comes standard.

Tier one · Masterwork Coverage

Product inspection Every item checked as it is unboxed, with a written report of any pre-existing damage or missing parts.
Full cleanup The whole area cleaned, every box broken down and moved wherever you want it.
Licensed & insured General liability cover. COI and W-9 go out on request.
Precision placement Every piece set exactly where you want it, to the floor plan if there is one.
Satisfaction guarantee We do not leave until you are happy with the assembly.

See how a visit runs

Tier two · The Masterwork Promise

$1,000Broken item guaranteeIf our team breaks an item during assembly, we replace it or reimburse you for it.
$500Day-of guaranteeCash, if we do not show up on your scheduled day because we planned it badly.
30 daysWorkmanship warrantyAnything that goes wrong because of our assembly, fixed free of charge.

Ask what your job is covered for

Standard on every job we quote. Exceptions go in writing before you book.

Asked and answered

Asked about Fully.

Do you assemble the Fully Jarvis standing desk?

Yes. The Jarvis is sold as requiring assembly, and it is built to the brand's instructions in the room it will stay in: each lifting column into its frame end, the side brackets on, the center rails slid in, centered on their marks and locked, then the control box, cables, handset and feet. The desk is turned upright, the leveling glides are set to the floor, and it is calibrated and run through its height range in front of you.

Do you connect the Jarvis control box and handset?

Yes. On a Jarvis it is one of the build steps in the brand's instructions. The control box slides onto the frame end with the capture plate, both leg cables and the handset plug into it, and the power cable goes in after them. We clip the cables to the frame, plug the desk into an existing outlet and run the reset that syncs the columns. That is where it stops: we do nothing electrical, and a new outlet is for your electrician.

Can you fit casters or a cable tray to a Jarvis desk?

Yes. Casters replace the pre-installed leveling glides before the desk is turned over, as the brand's instructions set out, and a cable management tray goes on under the top with its own instructions. The cables are then routed into the tray or clipped to the frame, so nothing hangs loose under the worksurface. We route cables, not power: there is no wiring in the wall and no new outlet, and the desk runs from the outlet you already have.

Can you take a Jarvis apart and rebuild it in another room?

Yes, within the same home. A Jarvis that has to change rooms can be taken apart and put together again where it is going, in the manufacturer's order, with every part counted before it goes back together. It is reset and run through its height range again once it is standing. A Jarvis that the movers took apart for a relocation is put back together the same way, counted and reset before it is used.

Can you set up Jarvis desks for a whole office?

Yes. Standing desk frames are part of our commercial work. On a floor of Jarvis desks, each one is built to the brand's instructions, set to the floor plan, reset so its columns are synced and run through its height range, zone by zone, inside the access windows the building allows and around anyone still working. A COI and a W-9 are available on request.